 |
EasyChem Software - Back
to EasyChem Description Page
EasyChem software was specially created for Windows 98 and higher
platforms and is written and supported by Systea.
Easy
to use
 |
Click
image above for a larger view |
Setting
up a run is easy, the user simply clicks the work list icon or menu
and selects colored symbols for each type of standard, QC, or sample.
The
operator, then chooses which analysis will be performed on the work
list, by selecting a pre-defined method. Multiple methods can be
selected for each sample, standard, or QC. Pre-run dilutions can
be selected on specific samples, and standards can be automatically
prepared from a stock solution. Automatic dilution and rerun of
off-scale samples can also be selected. The
operator can include in the work list: gain, drift, and carry-over
correction, if desired. Usual combinations of methods can be pre-defined
as "profiles" in the software setup, for ultra-fast startup
on a routine basis. Once the work list is complete, the operator
simply "clicks" to start the run; EasyChem does the rest.
During the run, real time sample results, calibration correlation,
and system functions are displayed to inform the operator.
QC
Controls
 |
Click
image above for a larger view |
Up to
five levels of real time QC’s can be used. QC results are automatically
stored and plotted in a user defined QC chart. In case of QC failure,
the analyzer can stop the run or simply notify the operator, flag
the QC result, and go on. After the run, EasyChem software shows the
limits for the QC standards and prints a symbol to show at a glance
whether each passed or failed.
LIMS
Connection
Data
can be transferred to an internal or network drive at the end of
the run (in a Text or ASCI format). Sample IDs can be imported from
a central computer. EasyChem software is compatible with all windows
supported networks.
For
more information about Systea Scientific, Please contact us at info@easychem.com
|
